EPDM Liner Seam Tape (2-sided) 6" tape, 50' roll
Use this 2-sided tape to join two pieces of liner together. Available in 3" or 6" wide rolls. For maximum sealing use cover tape (1-sided) in conjunction with this tape.
We offer two styles of tape for joining EPDM panels together. The most common method for joining two pieces of liner in a pond is to use the cover tape (1-sided). We strongly recommended using QuickPrime adhesive in between the liner panels to secure them to each other then reapply QuickPrime over the joint where the liners meet. Apply 6" cover tape (1-sided) over joint and always use a roller to work out any air bubbles under tape. When joining liners in a stream situation, we recommend using the 2-sided tapes. These tapes can also be used under the cover tape (1-sided) when seaming pieces of liner together for extra protection.
We offer two styles of tape for joining EPDM panels together. The most common method for joining two pieces of liner in a pond is to use the cover tape (1-sided). We strongly recommended using QuickPrime adhesive in between the liner panels to secure them to each other then reapply QuickPrime over the joint where the liners meet. Apply 6" cover tape (1-sided) over joint and always use a roller to work out any air bubbles under tape. When joining liners in a stream situation, we recommend using the 2-sided tapes. These tapes can also be used under the cover tape (1-sided) when seaming pieces of liner together for extra protection.
